HIT Valves pumps to various types and standards to suit the oil, power and process industries
HIT Valves has a tie up with DALIAN DEEP BLUE PUMP, One of the leading pumps manufacturers in China, the recognized top Chinese industrial centrifugal pumps manufacturer, especially for API610 pumps, one of three Chinese nuclear power station pumps manufacturers approved by the China National Nuclear Security Administration.
Deep Blue Pump does the whole complete production process from R&D and engineering, melting and casting, to machining and fabrication, to assembly, to testing and inspection, to supply after-market products, repair, and diagnostic services.
The EAP-I series is a horizontal, radial-split, single-stage, single-suction overhung centrifugal pump with a volute casing. It features a double volute casing structure with an outlet diameter greater than or equal to 80mm that can effectively balance the radial force and ensure the shaft deflection at the shaft seal. The pump is centerline-mounted and is suitable for high-temperature media. A balance hole and seal ring combination is used to balance the axial force over the service life of the bearing. The pump casing, cover, and impeller are provided with sealing rings, and the interference fit of the sealing rings is fixed with screws. This pump is suitable for working conditions with granular impurities without compromising the service life of the pump casing, cover, or impeller.
Capacity: 2~2600m3/h
Head: ~300m
Design Pressure: 5.0Mpa
Temperature: -80~+450℃
Speed: 2980r/min 1475r/min
Power: ~1120KW
The EAP-K series is a horizontal, radial-split, single-stage, overhung centrifugal pump with a volute casing. The pump is centerline-mounted, featuring a double casing structure with an outlet diameter greater than or equal to 80mm and an open impeller. The pump casing and cover are equipped with front and rear wear-resistant plates. The bearing component is designed with a bearing box structure to adjust the axial momentum of the rotor. The pump has a rigid shaft design that ensures smooth running of the rotor. A back blade balances the axial force, ensuring the service life of the bearing. The radial bearings are cylindrical roller bearings and the thrust bearings are angular contact ball bearings, which can properly bear axial forces from two directions.
Capacity: 2~2600m3/h
Head: ~280m
Design Pressure: ~5.0MPa
Temperature: -80~+450℃
Speed: 2980r/min 1475r/min
Power: ~1120KW
The EAP-G series is a horizontal, radial-split, single-stage, single-suction overhung centrifugal pump with a volute casing. It features a double casing structure with an outlet diameter greater than or equal to 80mm that can effectively balance the radial force and ensure the shaft deflection at the shaft seal. The pump is centerline-mounted and is suitable for any temperature medium. The inlet and outlet flanges are arranged on the pump casing for easy inspection and maintenance without the need to move the suction and discharge pipelines. With a no-balanced hole structure, the shaft head force generated by high pressure at the pump inlet can be offset by the impeller cover force, and the residual axial force is borne by the tapered roller bearing. The throat bushing is designed with a labyrinth groove or effective thread groove structure that can effectively cut off high-temperature heat sources and control the pressure of the sealing chamber.
Capacity: 2~1500m3/h
Head: ~280m
Design Pressure: ~10.0Mpa
Temperature: -80~+450℃
Speed: 2980r/min 1475r/min
Power: ~1120KW